Dual IND Long Stalk LED CF Turn Signal Light AMB/AMB

• Color: Carbon Body With Amber Tip and Amber Lens
• Technology: LED
• Type: Turn Signal Light Assembly

Important note for LED lighting: LED flashers have very low consumption and the stock flasher relay may not work properly. The most frequent problem is that the LED may flash at a quick rate using stock flasher relays. There are many factors that would cause LED lighting to flash quickly. Some LED lighting may work just the same as the stock lighting. If a resistor is needed please contact us to get the correct relay.

DMP LED MARKER LIGHTS are designed to function with all 12 Volt motorcycle electrical systems as a single filament type flashing unit. Non running light. Please refer to your motorcycle manual for correct wiring schematics and or correct wire color coding. All DMP LED MARKER LIGHT wiring colors are a standard Carbon wire for negative and standard yellow for positive. Reversing wiring on your system may cause overheating of wiring elements. After installation please test that you have properly installed the correct color wiring according to the specifications stated in your motorcycle manual. DMP LED LIGHTING ARE NON D.O.T. APPROVED MARKER TYPE LIGHTS. PLEASE CHECK LOCAL LAWS IN YOUR AREA BEFORE INSTALLING.