$29.95
Fits Keihin FCR MX Carbs
In stock
The Pro Circuit Carburetor Hot Start Fitting is designed with a 12 mm hex for easier tightening. Made from high-quality aluminum, it provides a better seal against the carb body compared to OEM plastic fittings. It eliminates breakage and stripping issues associated with stock plastic units. The fitting features a red anodized finish with the Pro Circuit logo etched on the side and connects the hot start cable to the carburetor.
| Weight | 0.10 lbs |
|---|---|
| Dimensions | 2.00 × 2.00 × 0.60 in |
| Make | Model | Engine | Year |
|---|---|---|---|
| Honda Motorcycle | CRF150R | 150 | 2007 |
| Honda Motorcycle | CRF150R | 150 | 2009 - 2015 |
| Honda Motorcycle | CRF150R Expert | 150 | 2008 |
| Honda Motorcycle | CRF150R Expert | 150 | 2013 |
| Honda Motorcycle | CRF250R | 249 | 2004 - 2009 |
| Honda Motorcycle | CRF250X | 249 | 2004 - 2009 |
| Honda Motorcycle | CRF450R | 444 | 2007 |
| Honda Motorcycle | CRF450R | 449 | 2002 - 2006 |
| Honda Motorcycle | CRF450R | 449 | 2008 |
| Honda Motorcycle | CRF450X | 449 | 2005 - 2015 |
| Kawasaki Motorcycle | KX250F | 250 | 2004 - 2008 |
| Kawasaki Motorcycle | KX250F | 250 | 2010 |
| KTM Motorcycle | 450 EXC | 450 | 2003 |
| KTM Motorcycle | 450 MXC | 450 | 2004 - 2005 |
| KTM Motorcycle | 450 MXC Racing | 450 | 2005 |
| KTM Motorcycle | 450 MXC-G Racing | 450 | 2003 |
| KTM Motorcycle | 450 SX | 449 | 2009 - 2010 |
| KTM Motorcycle | 525 EXC | 510 | 2003 |
| KTM Motorcycle | 525 EXC | 525 | 2005 |
| KTM Motorcycle | 525 EXC Racing | 525 | 2004 |
| KTM Motorcycle | 525 EXC Racing | 525 | 2006 |
| KTM Motorcycle | 525 MXC | 525 | 2004 - 2005 |
| KTM Motorcycle | 525 MXC Desert Racing | 525 | 2003 - 2004 |
| KTM Motorcycle | 525 SX | 525 | 2003 - 2004 |
| KTM Motorcycle | 525 SX | 525 | 2006 |
| KTM Motorcycle | 525 SX Racing | 525 | 2005 |
| Suzuki Motorcycle | RMZ250 | 249 | 2004 - 2010 |
| Suzuki Motorcycle | RMZ450 | 449 | 2005 - 2008 |
| Yamaha Motorcycle | WR250F | 249 | 2003 - 2009 |
| Yamaha Motorcycle | WR250F | 250 | 2010 |
| Yamaha Motorcycle | WR450F | 449 | 2004 - 2006 |
| Yamaha Motorcycle | WR450F | 449 | 2008 |
| Yamaha Motorcycle | YZ250F | 250 | 2003 - 2005 |
| Yamaha Motorcycle | YZ250F | 250 | 2007 - 2010 |
| Yamaha Motorcycle | YZ450F | 449 | 2004 |
Use this to plug your speedometer drive gear when removing the cable for installation of an aftermarket speedometer or computer. Since the drive contains the spacer, you’ll need to keep the drive installed or use very expensive custom aftermarket spacers. These inexpensive plugs will let you seal the grease in and dirt/water out using the OEM retaining screw. Simply install the same as you woul…
Reviews
There are no reviews yet.